1. Select your style, finish and options
Style Name 

2. Select decorative options to enhance your mantel ( Click for details )

3. Measure your fireplace stone  (Dimensions of stone as is before mantel)

Referring to the diagram below, enter measurements (to the nearest 1/8"). Take each measurement in several places and supply the largest reading. Measure both sides of the fireplace. If your stonework differs greatly from the diagram below, please e-mail a picture at admin@ecabinets.com. Enter the actual stone dimensions only and we will calculate mantel dimensions to fit. Provide all the required information to insure a proper fit, even if 0 or n/a.

"A" Stone width       "B" Stone depth Left  Right  "C" Stone height above hearth Left  Right  "D" Additional hearth width Left  Right  "E" Hearth height Left  Right  "F" Nearest obstruction Left  Right  (Important: Describe obstruction in the comments section below.)   Left  Right  "G" Firebox opening Width  Height     (From hearth to top of opening)
Does stone run:  Floor to ceiling Half way up
For a cap mantel, specify the size of the cap. You may order a cap mantel by its bottom dimensions, "A" and "B", or by the overall top width.     Please specify: Bottom Width A and Bottom Depth B  or Overall Top Width
For a full mantel, specify size of "wrap" if desired. By how many inches do you want mantel to wrap around (overlap) front outside edges of stone? Be sure to retain enough stone clearance for fire code. Overlap sides of stone  inches Overlap top of stone  inches Other comments about your fireplace
4. Provide the following contact information
Name
E-mail address
Daytime phone number
Daytime fax number
Note: If you can email us photos of your fireplace, front and side views, we can give you a more accurate quote and provide better suggestions.
We must ensure that you are human. Enter the above text: